🎛️

GasTest Log

Time it. Photo it. Prove it.

Run the code-required gas piping pressure test, capture a start and end gauge photo, and hand the inspector a code-cited PASS/FAIL certificate — straight from your phone.

PASS FAIL

Run the hold

Pick a code preset; a wall-clock countdown times the required hold with haptic checkpoints — even with the screen off.

Photograph the gauge

A time-stamped start and end gauge photo — tamper-evident proof the line held its pressure.

Hand over a certificate

A one-page, code-cited PASS/FAIL report (IFGC / IRC / NFPA 54) the AHJ can accept in lieu of witnessing.

No extra hardware

Use the mechanical gauge already on the pipe. Fully offline. No account. No Bluetooth manometer required.

A tool, not a code authority. GasTest Log does not measure pressure and does not decide pass or fail — your calibrated gauge measures, and you, the licensed technician, read it and attest the result. Test pressures and hold durations are the model-code default; local amendments vary, so always confirm with your Authority Having Jurisdiction (AHJ).